-
Map Pin Sign and Auto Zoomout Option for the map
There are two issues that I would like to raise here with the Product Team. I have checked with the technical team, and I have been told to direct my idea here (refer to case # 05867714), as the current asking is not available in DOMO. In a map locating different cities by coordinate (Latitude and Longitude), I want to use…
-
Domo Map - Show State Only Instead of Whole US
Hello, I am trying to build a heat map at zipcode level. I wonder if it is possible to build it in a way that if I select 'Florida' as a state, only Florida is shown in the map instead of the entire US? Thanks!
-
ability to control the colors in a Lat/long map for a series of values
There is a 'Series for Color' option available for Lat/long map cards, but setting the Symbol Color only allows the specification of one colour, not one colour per series value. I would like to be able to control the colour of each series value in order to maintain visual alignment with the colours used on other cards -…
-
Route Map Edge Case: Ability to remove lines between points while still retaining Point 1/Point 2
Hello! I have an edge case on a map I'm creating. The Lat/Long Route Map I saw seemed perfect for the customer I building this for, but then they provided feedback saying they want the symbols/dots but they do not want the lines going between the dots. I do not believe there is an ability to remove the lines/routes between…
-
Multiple Values on State Map
I'm not really sure if this is a visualization question or a Beast Mode question. I have built a map showing profitability by state, that changes depending on what the user filters for. For example, if the user filters for the year 2023, the map updates with the profitability for that year. Now, I want to determine the…
-
How do I only show one legend on a map card?
I know how to hide or show my legend but when I "show" it, it displays two legends when I only want one to show. When I press "hide" legend it hides both legends when I only want one hidden. How do I leave the legend on the right hand side and get rid of the legend on the bottom. Both legends have different information and…
-
PHOENIX MAP PLAY BRICK
I want to create a map which changes over a period of time like for example
-
More capital cities listed in standard World Map graph
Currently, when enabling the 'Show Cities' option, it is interesting (but likely irrelevant for most organizations' use cases) to see one of the cities displayed is Kinshasa, capital of the Democratic Republic of the Congo. So that users can have easier understanding around the concentration and coverage of…
-
Map Chart diverging by Column, variable or calculated value
Use case: Build a map where the provinces are red whenever their performance in percentage is lower than the country average performance and green otherwise. Right now this is impossible. At the moment the ability to set a green or red visual clue is determined by either The mean, the median, zero or a fix number set un…
-
Show a 0 instead of "No Data" on Map Cards
It would be great to add a feature to map cards to show a 0 instead of "No Data" on map cards. It would look a lot cleaner and save a lot of effort having to build out an ETL solution every time. If that's not doable, changing the formatting for "Hide No Data Items" would be helpful. Being able to keep the state name in…
-
Replace "No Data" with a 0 on Map Cards
How do I change a map to show a 0 instead of "No Data"? The only option I've been able to find is "Hide No Data Items", which is unusable. I couldn't find anything in the card settings, and I'm hoping it doesn't involve an ETL solution. Thanks!
-
Map cropping out Scotland
Any idea why the map is cropping out Scotland? We don't have a pin in Scotland but we need to show the whole of the UK. I have disabled 'auto zoom to data' but it doesn't let me zoom out to show more
-
Trouble with uploading KML file into a Custom Chart
I'm having trouble uploading a KML file into a custom chart. The file is a US Census Tract map and I downloaded it as a KML file from the US Census so it's reliable - I also uploaded it into Google Earth to make sure it was correct. However, when I go to upload the file into a Custom Shape, some of the objects are rendered…
-
How to get correct bubble sizes on a lat/long map
Bubble sizes on the lat/long map are not appearing correctly in the legend. First, the smallest I am able to get the bubble (using the "small" scale marker) is still very large, and it does not correspond to the size of the bubble that appears in the legend. In the screenshot attached, I circled a bubble with a value of 1,…
-
Is it possible to build a map at the Census tract level?
I'm looking to visualize some data set at the Census tract level, but can't seem to find a card or app that does this. Is this possible? If so, what are my options here?
-
Zip2Fips - map card issues
When I try using a United States map card or a State map card, I get the result in the screen shot I've attached. In this example, I've narrowed it down to 2 donors from Illinois (shown in the data table below the card). I am using the column "zip2fips.donor_state_tz" column for the "select county fips code" for US state…
-
UK maps - long/lat
I'm looking to setup a UK map which shows the location of each site around the UK using long/lat, is there a specific way that I need to format the long/lat numbers as no data is showing with the data that I currently have? Thankyou
-
Return data within geographical radius?
I have a table containing a list of zipcodes and corresponding data. Say a salesperson unfamiliar with SQL wanted an elegant user-friendly interface to return all rows within a 5 mile radius of a given zipcode. Is there a way to implement geographical data like this? Or perhaps a free Domo app that can integrate this…
-
How to build a sales by state US Heat Map DOMO CARD Drillable into different vendors (US MAP)
Hi everyone, Just wanted to check if there is an article that will help build a sales by state heatmap for US States (on US MAP) drillable into vendors... Thanks, Arun
-
How to include include Pie chart inside Map Chart
I have created a Map chart that represents 'Number of Universities 'in each state in US. I would like to add a 'Pie' chart inside each state so that I could bring information on how many Private Vs Public universities each state contains. I want to make a chart something like below, With DOMO Map chart, however I could…
-
Drilling between custom charts
Hello, I'm trying to make a tool using custom charts for our building, but I'm not sure about the feasibility of my design idea. Essentially, I'm trying to recreate the drill down process to Zip Code shown in this DOMO video: https://www.youtube.com/watch?v=UUZ_RvKX8O8&ab_channel=Domo, but instead using custom maps of our…
-
Global Map, can you have dynamic filters
Hi, I have a global map card which shows our total number of jobs per country. We have different job types and ideally I would like to show these on the map but in a different colour. Is it possible to have the map coloured in relation to the filter "Job Type"? Thanks,
-
How to have a world map that enables selection (and drill-down) by continent?
Hi, I'm trying to build a card with values related to several locations across the globe. The drill-down path would consist of 3 levels: - Global level: a world map that would let me choose a continent. Displays data aggregated by continent. - Continent level: a map of the selected continent, which would let me choose a…
-
Multiple Countries Map
Hi, In using the Domo country map, I'm wondering if it's possible to assign the same value to a group of countries without repeating the row. For example: Country - Value Kenya, Uganda, Tanzania - 10 Italy - 18 India - 55 Thanks
-
Lat/Long Maps - is there a way to constrain the view to a specific area, based on PDP?
I have customers across the country who want to see where their users are within a specific geographic region (ie customer A operates out of California and only wants to see California users on a map). All other cards in the dashboard the customers are able to see is already filtered to an extent via PDP - is there a way…
-
Maps not displaying percentages correctly
Has anyone seen issues with displaying Percentage formats in Maps? Specifically, I want the data and the legend to display as a percentage, however, I can not get the format to stick. When I edit the STATE VALUE format to display as a Percentage (and check multiple by 100), it initially displays correctly as a percentage…