-
Flex Table Improved Customisation
Hi all, I've recently used a Flex Table and was shocked by the few available customisation options. Something as simple as changing my line's colour is seemingly impossible. Improvements that feel essential: Change Header Colour Series Grouping/subtotals Change Line Colour Remove the Area under the line Change…
-
Beast Mode calculation when data is in rows and then how to chart
Hi All I have a dataset (a sample is attached) where the 2 series I want to track are in the same column, identified by the Split Answer (i.e. male or female). I want to calculate the % split answer value by dividing the value by the sum of all values where the Split Detail is held constant (i.e. what is the % of female…
-
Copy/Paste Formatting
I want a feature where you can copy and paste formatting from one card to another similar chart. Example: header row coloring, sizing on single value card.
-
Date Picker & Period Over Period Chart Enhancements
We have end users who want to set a date range and see the change compared to the corresponding previous period. Currently, in PoP cards, you can: Set a comparison period on the cards that overrides the dashboard date picker OR Use variables and Beast Modes to create current and previous period calculations and add the…
-
Paging in a Table Card
Hi there, I was reading a closed forum question that suggested an answer that may no longer be true at this date. Original Question: I have a Mega Table with about 600 rows. I don't want to show all 600 at the Dashboard level, even with the scrolling aspect. I'm concerned that it will affect the Dashboard Performance. The…
-
Allow an opt-in feature for the "Other" bar's truncation
Currently, when you select a Maximum Bars value in a bar chart, an 'Other' bar appears and it often appears truncated as shown in this article: It would be better to have the option of truncating it or not. Even better, show the break in the bar like this:
-
In App Editable Data and Real-Time Visualizations
Hi Everyone, If users wanted to be able to edit the data that goes into a visualization, and then see how that edit impacted a visualization (and all of it's great metrics), what would be the idea way to do this in Domo? I was thinking that you could use a Domo Webform to let users plug in new data/edit data, and then use…
-
Trimming Pivot Table to Only Display Items with Top Totals
Hey there forum community. Using the Pivot Table in domo and trying to trim the rows to only display the top "X" of them to cut out a lot of the noise of low value items. Wasn't able to find anything online. In excel pivot would be a simple filter. Andy
-
Ability to color code the "Other" Category for Pie and Donut Charts
Somewhere in the settings for pie and donut charts it would be great to be able to hard-code a color for the "Other" category that gets created when there are many items in the series. We have a lot of color rules setup for various fields and it is annoying/hard to read pie charts when the "Other" category's color keeps…
-
Charts with multiple columns on X axis
I want to create a chart in DOMO with multiple columns on X axis in the below way? How can this be done? I tried to add multiple columns on the X axis but it doesn't take.
-
Scatter Plot with a dynamic x-axis scale marker?
Hi, I am using this nice feature that allows me to mark the average (median, etc) value on the y-axis, that would also adjust dynamically. However, it doesn't seem it is possible to do so for the x axis. you can set one manually using quadrant lines, but that would require manual adjustment every other day. Any ideas?
-
Force Pie Chart to show data for only most recent day of date range
I have a dataset that has the following columns: Date, Store, Plan, Total. My users want a pie chart that shows the total for each plan type on the last day of whatever date range the filters set, i.e.: if today is the 24th and the filter is set to month to date, I want only the values for the 24th. Unfortunately, no…
-
Legend in Pie Charts
Hi, It seems that something recently changed so my pie charts are displaying the total on the side and in the summary number as well. The graph on the left is how I am trying to get it to look but I cannot figure out why the graphs on the right are showing the total in the chart. Was this a recent change? Any suggestions…
-
Can I make a grouped bar chart with 2 series/categories?
Hello! I am currently trying to make a grouped bar chart that is also stacked. In this scenario I want to compare our power and core members and within those groups how many of each are a website client with us. If they are a website client, I want that bar to be stacked to show what type of website that member has. This…
-
Aggregate Count While Still Filtering By Time
I want to make a pie chart out of the following rows where a row value is based off the count (not just 1). The rows are grouped by time. The table looks like the one below. The problem is the chart doesn't aggregate Success to 12 but leaves them as separate series Success 5 and Success 7 in the legend. I have multiple…
-
More customization in text cards
Allow more customization in text cards (line breaks, text size and color...etc)
-
Limit Quick-Sort options
For example, a particular card may only want the quick-sort options to be Value-based, vs. category based. If alpha-numeric category sorting isn't relevant to a card, users may (are) be getting confused, but it'd be nice to save the 2-3 clicks to go "back" to the other value-sort they were looking at.
-
Can I omit certain values on line graph from being calculated in avg line?
I have an interesting case here, I have a cost per lead value being graphed by week for the past 9 weeks. Only problem is that when there are no leads the value is blank and the line breaks. I can fix the problem by using a beast mode to say when there are no leads to just zero out the Cost per Lead value. When I do that,…
-
Barchart behaviour when the sorting criteria doesn't match the fields shown
Barchart has an umpredictable behaviour when the sorting criteria doesn't match with the fields shown in the card
-
Multiple Values on State Map
I'm not really sure if this is a visualization question or a Beast Mode question. I have built a map showing profitability by state, that changes depending on what the user filters for. For example, if the user filters for the year 2023, the map updates with the profitability for that year. Now, I want to determine the…
-
comapare current-3 days in period over period chart
I have a use case where the data gets updated everyday, however the complate data will be available only for current-3 days. How can I display a period over period chart to compare current-3 to current-4 days?
-
aggregating average value of a month
date any_hva 1/4/2023 123 1/4/2023 233 1/4/2023 234 2/4/2023 115 2/4/2023 111 I have a table in a following format, same dates are present in multiple records since there are other categories(not shown) in whichany_hva is split. I want to display a monthly chart in which I want to display average value per day. Just…
-
More dynamic elements in the cards
It would be very useful if not only the "Summary" but also the titles of the cards could be made dynamic. In the summary you can put fields that do not exist in the visualization while in the title you can only put certain limited fields (filters, date, etc). It would be solved by allowing the inclusion of a field,…
-
Dynamic Values for Scale Markers
It'd be good to have the ability when using Scale Markers to use Fields and Aggregations just like you can do for Summary Numbers. Even on a basic bar chart, if you use the Average, it just does an average of the Totals Shown, rather than the actual average of the field being used for the Y Axis, so if you show Average on…
-
How to calculate against row values, instead of a summation, when using a beast mode within a pivot
I'm currently using a simple beast mode within a pivot the table. The beast mode calculates the percentage change in the values from two columns. The issue is that, for subtotal and total, the beast mode is summing up all the percentage change values above it, therefore returning inaccurate values. Is there a way to…
-
Dynamic quickfilter values by default (ie last month)
Being able to tell DOMO that by default the card appears filtered by values that are not always the same. Right now you can only point to a specific value but you cannot enter a logic so that, for example, it selects the last month.
-
Drill down & quickfilters improved communication
When Drilling Down from one visualization to another with different datasets: to link the filters that are created when drilling down with the quickfilters. If I want to continue browsing a visualization, it becomes inconvenient to have to delete the specific filter created by drill down, in order to continue filtering by…
-
Fixed colors based on dimmensions / measures not used
In bar charts, being able to define a fixed color based on a value even if it is not used, for example, the maximum value, or a certain peer. We frequently required to highlight based on logic, such as max/min value, contains value, etc. There are a lot of scenarios where this feature would be handy.
-
Dual-axis settings
Dual-axis visualizations should have different settings at the element level, hover...Today, the settings are common for both axes, which means that the information displayed is often not optimal.
-
Table customization
Allow modification of table attributes: borders, colors... With the phoenix library (the one used by Domo to design tables) it is not possible. Customization options are very limited.