Help with Beast Mode field please!
Hello Community,
I have a beast mode field that is working great when I am using a single number chart looking at the total for the current quarter we are in. The problem I need help with is, what can I update or what am I missing from the below Beast Mode field that will not allow me to show each month in the current quarter with the totals for each month. Right now how it is behaving is when I use a bar chart all of the value goes into the first month of the current quarter where I need to see each month represented with its own calculation.
What the calculation is doing, is taking all of our closed opportunities in the dataset and finding the win rate %. Then it is using that percentage found and multiplying the total ARR for our pipeline opps for the current quarter. We are allying the percentage as a weighting to show the weighted value of our pipeline deals for the quarter based on our historical win rate %.
Again any help would be greatly appreciated if you can advise what I should update and or change about the below Beast Mode formula to allow the bar chart to show the total weighting by month for opps closing in that month?
(SUM(case when `Stage` = 'Closed Won' AND `Primary Quote` is not null then `MDR New ARR` else 0 end) / SUM(case when `Closed` = 'true' AND `Primary Quote` is not null then `MDR New ARR` else 0 end)) * (SUM((case when QUARTER(CURRENT_DATE()) AND YEAR(CURRENT_DATE()) AND `Closed` = 'false' AND `Primary Quote` is not null then `MDR New ARR` else 0 end)))
Shawn
Answers

Hi @reichner015
How is your underlying data formatted? Is your data broke out by month or by quarter or day?
**Was this post helpful? Click Agree or Like below**
**Did this solve your problem? Accept it as a solution!**1 
the data is coming from salesforce into a opportunity dataset. The main date field in question is close date which would be a day.
thank you
shawn
0 
You need to play with your parentheses a bit, I think. Depending on exactly what maths you are looking to achieve, this may help. Though, this assumes that you are including the multiplication step in the denominator. Not sure your order of operations.
Throwing the sum around all of it may help with the date issues because it will need to aggregate with all those case statements in play. I spaced it out to hopefully help.
SUM(
(SUM(case when `Stage` = 'Closed Won' AND `Primary Quote` is not null then
`MDR New ARR` else 0 end))
/
(
(SUM(case when `Closed` = 'true' AND `Primary Quote` is not null then `MDR New ARR` else 0 end))
*
(SUM(case when QUARTER(CURRENT_DATE()) AND YEAR(CURRENT_DATE()) AND `Closed` = 'false' AND `Primary Quote` is not null then `MDR New ARR` else 0 end))
))
DataMaven
Breaking Down Silos  Building Bridges
**Say "Thanks" by clicking a reaction in the post that helped you.
**Please mark the post that solves your problem by clicking on "Accept as Solution"0 
@DataMaven Thank you for your comment, that was helpful, however I am still not seeing how to break it down for each month in the current quarter. Looks like it is still grouping by quarter in your example.
I need to somehow within that current quarter find month one of the current quarter in a dynamic way, then month 2 and lastly month 3 of the current quarter.
Any additional thoughts my friend?
Shawn
0 
Hi @reichner015
Are you selecting to view your data for the current quarter by month in the date selector (upper right of your chart)? Are you using your opportunity date as your xaxis on you chart?
Also with your beast mode `QUARTER(CURRENT_DATE()) AND YEAR(CURRENT_DATE())` isn't really doing anything as it will always return a non0 number which is treated as True. Are you wanting to compare your date field to the current date? You'd need to do something like this:
QUARTER(CURRENT_DATE())=QUARTER(`date`) AND YEAR(CURRENT_DATE())=(`date`)
**Was this post helpful? Click Agree or Like below**
**Did this solve your problem? Accept it as a solution!**1 
Grant has good advice.
DataMaven's beast mode is problematic b/c she's using nested SUM() functions without an OVER clause which will have unexpected (if any) results.
1) be clear about what you want to show. do you want to see one row per quarter or one row per month? (start with a table card, and build each piece of your math as separate beast modes so you can manually do the multiplication / division and ascertain whether you're getting the desired results for each component).
2) keep in mind that unless you use a window function, your beast mode can only access the data in the row that it's in. i.e. if you are showing months, you can only access opportunities that closed in that month (and therefore could not calculate a cumulative or quarterly total without the use of a window function).
3) keep in mind the rules of basic math. if you multiply or divide by zero ... your result will be zero or undefined so make sure your components don't resolve to zero.
Jae Wilson
Check out my 🎥 Domo Training YouTube Channel 👨💻
**Say "Thanks" by clicking the ❤️ in the post that helped you.
**Please mark the post that solves your problem by clicking on "Accept as Solution"0 
@GrantSmith Grant, thank you sir, and to answer your question the date picker in the top right of the card is set to all time. I am sorry if I was not clear, but in my initial ask, that was broken down a little. The reason for this is if you look at the start of my beast mode, the win rate calculation is used for "ALL Time" to get our percentage multiplier to apply to the opps for the current quarter to get a weighted forecast for the quarter.
I also need to then show that same current quarter, but need to see that calculation using the "All Time" win rate for each month of the current quarter. Hope that helps make it clearer so I need to show a currency field showing the weighted value for all opps closing in the current quarter, and then three more single number cards showing the weighted value for opps closing in month 1, 2 and 3 in the current quarter.
Help? Thanks for replying and trying to help sir,
Shawn
0 
Really trying to get an automated way to isolate Month 1, Month 2 and Month 3 of the current quarter. Otherwise it seems I will need to do manual entries of start and end dates of each month, and I want this to be future proof if you will, and not have to revisit and make changes/updates each quarter.
Thanks,
Shawn
0 
you can use pieces of everyone's advice to solve this.
sum(sum(amount)) over ()
will create a window function that allows you to look over all the rows in your dataset. build your CASE statement in place of amount to calculate your lifetime win rate.
to isolate transactions in the nth month of the quarter, i would build a date dimension (one row for every day since the dawn of time) that in includes the quarter number and month of quarter and a binary column (1 or 0) called isCurrentQuarter to indicate if it's the current quarter.
Alternatively you can build an insanely complex beast mode. if the transaction took place in the 8th month, 3 months per quarter then MOD(8/3) +1 = 3
if you were in the 9th month then MOD(9 / 3) + 1 = 1.
MOD being the function modulo which gives you the remainder.
Jae Wilson
Check out my 🎥 Domo Training YouTube Channel 👨💻
**Say "Thanks" by clicking the ❤️ in the post that helped you.
**Please mark the post that solves your problem by clicking on "Accept as Solution"0 
@jaeW_at_Onyx Is there any chance you may be able to show this in an example sir? I am very new to domo and the beast mode with no real training, only learning by being shown at this point. Any help would be greatly appreciated!
Thanks,
Shawn
0 
@reichner015, here's a youtube video i posted where i dive at length into Window Functions (it is a feature you'll have to ask your CSM to enable).
I am available for mentoring and consulting services through my company OnyxReporting.
Jae Wilson
Check out my 🎥 Domo Training YouTube Channel 👨💻
**Say "Thanks" by clicking the ❤️ in the post that helped you.
**Please mark the post that solves your problem by clicking on "Accept as Solution"0 
And yes  In my beast mode comment, I was just breaking it down differently, using what was already typed. I didn't make an example and test it or anything.
DataMaven
Breaking Down Silos  Building Bridges
**Say "Thanks" by clicking a reaction in the post that helped you.
**Please mark the post that solves your problem by clicking on "Accept as Solution"0
Categories
 All Categories
 1.5K Product Ideas
 1.5K Ideas Exchange
 1.4K Connect
 1.1K Connectors
 283 Workbench
 4 Cloud Amplifier
 4 Federated
 2.7K Transform
 90 SQL DataFlows
 569 Datasets
 2K Magic ETL
 3.4K Visualize
 2.4K Charting
 601 Beast Mode
 15 App Studio
 29 Variables
 600 Automate
 151 Apps
 418 APIs & Domo Developer
 29 Workflows
 2 DomoAI
 28 Predict
 12 Jupyter Workspaces
 16 R & Python Tiles
 363 Distribute
 99 Domo Everywhere
 262 Scheduled Reports
 2 Software Integrations
 98 Manage
 95 Governance & Security
 15 Product Releases
 Community Forums
 37 Getting Started
 28 Community Member Introductions
 90 Community Announcements
 4.8K Archive