-
Can I have a multi-bar multi-line chart where I'm looking at two separate values?
I'm trying to recreate this chart from Excel in Domo. I've included a photo of the chart with its source data: The relevant data in the dataset in Domo is configured like this: Nothing I've found so far regarding replicating combo charts accounts for dealing with displaying multiple metrics, just for dealing with multiple…
-
Benchmark reporting
I have a lot of data about my customers use of our products and i am looking to create a report that compares there account to the anonymised full customer base. Whats the best way to do this? To add a small challenge, i will be later using these reports in dashboards that will be embedded on our portal with Serverside…
-
Increase the field limitation on Pivot Datacard view
The Pivot table view on a Datacard only allows to add upto 10 rows/columns to the visualization. If we try to add additional rows/columns it starts replacing the existing ones with the new row/column. There should be no limitations to the Datacards as it could vary based on different views we require to visualize our data.
-
Be able to change the default color of positive and negative values in charts
Hi Community, We'd like to request the capability of changing/defining the default positive and negative color in "Change value options" in charts like "Multi-value". Currently, the default color for positive value is green and it's red for negative value. However, we'd like to avoid using red and green for potential user…
-
Add option to Trellis/Tiered Date Settings to continue cumulative totals
Currently when using Trellis/Tiered Dates on a card, a cumulative total will reset in the different sections. Whilst this is useful when reporting cumulative totals by periods, trellis/tiered dates need to be removed when cumulative totals are required across different periods. See below examples Suggesting to add an…
-
Calculating period over period change in Domo
I've been trying to find a solution for easily calculating percent change of metrics between two periods and put them in a table. Like "What is the percent change for "costs" between this month, and last month?" Normally this is easy to calculate outside of Domo using the standard formula: (V2 - V1) / V1) *100 However,…
-
Beast Mode Calculation used to view data in Table
My question is related to showing Comments/ Verbatim in a Table using a Beast Mode to Apply Business Rule. In Org Survey, we want to make sure that if we have less than 5 unique comments then don't show the comments. If the Business Rule of >= 5 comment is met, only then show the comments/verbatim. Below is an example…
-
Pivot Table switch values to show as columns or rows
Been working with Pivot tables for a while now, and one of the huge things I miss is the ability of selecting whether the values should be displayed as Columns vs Rows, something that you have in simple spreadsheet programs. This has proven useful when you want to show the same metric by different aggregations for example,…
-
Boxplot Data Label Improvements
The options for the boxplot data label settings are pretty limiting. Although they have provided some great opportunities to visualise, due to their positioning (and options), I often struggle to present the data in a way that is accessible to the layman. It does not make sense for the median to position itself above the…
-
Can you add count (n) to box-plot graphics?
Hey all, Has anyone managed to add a count to a series boxplot graphic? I want to show the distribution of a score against categories, however, I also want to present the number of items in the category. Is anyone aware of a way to facilitate this? Best, Sam
-
Interactive Tables with Writeback functionality
Hi There, This may be a complex ask. But I think it could be extremely valuable. I would love to create a table powered by Domo for our planning team that is powered by Domo but would also have a dynamic user input field. This field would adjust calculations on the card but could also have writeback functionality. In my…
-
Dynamic Organization (Span) View
I am trying to find a way by which when a user view the Dashboard, then based on his/her PDP, s/he must see his/her own score and must see his/her Direct Reports entire span/ org score. I have attached a dummy data creating the scenario and along with it I have added Org Chart and the Views that is expected. Any help in…
-
Dynamic Conditional Formatting
Current conditional formatting is very useful, however still quite limited in functionality especially with numeric and date values as these are static. A current workaround for this is to utilise HTML tables, or create additional columns for above/below the required targets, which gets quite messy. It would be hugely…
-
Data Labels with Period over Period Charts
Hello, New Domo user. I am trying to add data labels to charts using a PoP chart. I jsut want to show the total numbers above each bar chart and the data labels setttings doesnt have the option to show the labels. Seems like an easy thing I can't find but I just cannot find it…
-
Nested bar chart categories not fill up the total width?
The example visualisations, guidelines, and articles all show it fill up. My one is shown below. It makes it hard to click and see the category.
-
New Update Column Justification logic
Hey, There's been an update on how sort shows on table headers. When an item is centre-justified, the sort buttons offset the justification to the left, which makes it look absolutely rubbish. Has anyone got a workaround for this thats isn't removing sorting from the whole table? Best, Sam
-
Allow Beast Mode as "Default Value" in an Input + Slider Variable
Hey guys! I think it would be really awesome if you allowed Beast Modes and/or Aggregations as the Default Value in the Input + Slider and Slider Variable Type (see screenshot). I heavily use variables to show how changing Win Rates up or down by X% would influence our End of Quarter Net Revenue Projections, and I think it…
-
Customize Color Theme / Reverse Order
I recently built a heatmap table where I want the lowest numbers up top. These start around -25 and end at -10 currently, but the numbers will change each time the chart is updated. I also only want to show 10 rows of data, so the table has been limited to the 10 top results. I want the heatmap to display negative numbers…
-
Add "Select All" Option To Drop-Down Filter Card
We had a use case where a user wanted to select all options in a drop-down filter except for one. However, the drop-down filter tile does not have the option to select all (which is a bit strange as other filter options (i.e. check box, radio) have this feature). It is tedious to have to go through all the options to…
-
Duplicate a card within the same dashboard?
Hi, is there a way to duplicate a card in the same same dashboard? Click on the Move/Copy option and then selecting the same dashboard doesn't do anything for me.
-
bar value display issue
I'm thinking this might be a support ticket but thought I'd try here first. I've attached two images of a card that a user shared with me. The first image is what the card looks like before any recruiters are selected within the quick filter. The second image is what happens after any recruiter is selected. In the second…
-
Can a Sub-Dashboard be changed to a main Dashboard?
I have a Dashboard named "Dashboard 1" which has a sub-dashboard named "Dashboard 2". It is possible to "drag" the sub dashboard out of it's parent Dashboard so it is stand alone? I would like to delete Dashboard 1 and keep Dashboard 2. Any help appreciated! Thanks
-
bar graphs incorrect visuals
Hi, I am experiencing an issue with Grouped bar graphs. The x-axis is duplicated with the items, despite the data is seen correctly on Data Table (inside analyzer) and also when put on a HTML Table. Using beast mode calc for values. The category column is straight from the dataset.
-
Is it possible to show the parcel percentage instead of parcel quantity on DOMO map?
Currently it is showing the parcel quantity by province. I want the parcel percentage each province takes to be shown on the map. How to design it? Do I have to use ETL to create a new aggregated column in % for the raw data? I do not prefer to change the original dataset because I've created too many beast mode calculated…
-
Last X Periods to Date
I would like to add to the date filters on the to right corner of charts the following options: Life to Date Last [X] [Period] to Date I have a dataset where a number exists for 'Max Business Date' each day. As the days pass, the number gets bigger until it reaches the total number of business days at the end of the month.…
-
Edge of filters getting clipped in Domo
This is a very minor inconvenience I face when trying to build a dashboard. The right borders of any filters I add to dashboards as cards seem to get clipped. Anyone else face this issue and know how to avoid it? The right edge next to the dropdown arrow in the filter is what I'm referring to
-
Variable names in String
Hi, The current variable selector accepts the values either in Default (Numeric) - Gives a comma separator automatically. Percentage Currency - Adds $ as prefix. Do we have any work around to avoid comma? Do we have any work around to use other currency symbols as prefix with currency format?
-
Multi value comparison
Hi, I am configuring a multi value comparison card. I have Sales column which is being configured in Gauge Value. In Comparison Value, I want to input the value of Sales Column itself but of previous year. I want this comparison to be dynamic because on my dashboard I have dropdown filter (Year, Month, Quarter). So if I…
-
Dynamic data comparison
Hi, I want to perform QTD, YTD without using Domo inbuilt features dynamically. Like, I will have a dropdown for Year using dropdown chart using the Year column from dataset. And variable selector for QTD, YTD. User may select any of the variable selector and any one year from the dropdown. Example: Variable Selector : QTD…
-
Median Value in Total Column
Hey all I'm creating a heatmap visual that compares our engineers' ticket cycle time against projects and uses the median value. When I add a total column to the graphic, the column sums the values above instead of calculating the median across all projects. Can the visual be adjusted to calculate an overall "Median"? ref:…