Time

Views keeps converting time to UTC
Hi All, I am having an issue with a dataset. I am trying to extract an hourly occupancy from people's entry and exit dates and time. However, Views keeps converting the times from Eastern to UTC. I have checked, and my company's time zone is already set to Eastern. I'm not sure what to do from here. If I do an offset in a…
Dataset Scheduler - Timezone list limit and/or alphabetic sort
As a new customer setting up datasets, the time zone selector is just a poor UX. First off, the time zones aren't sorted any logical way. It would be nice if they were at least alphabetic. Type to search would be helpful. But my primary "idea" is to add functionality at the Admin level to limit the time zone selectors to a…
Beastmode Timediff Errors
Hi all, using the following to calculate time differences between requested and actual drop off times: TIME_TO_SEC(TIMEDIFF(Actual Drop-off Time,Requested Drop-off Time)) / 60 Seems like the math isn't panning out (first column should be ~25 in the time difference column but instead is showing 1415.80). Haven't used the…
How can I keep my data's time zone consistent? 24 to 12 hour conversion issue.
A colleague of my is uploading data currently in 24 hour time into workbench. But, DOMO unnecessarily converts it from UTC to EST when he tries to change it to 12 hour time. Is there a way for us to stop it from adjusting time that's already in the right time zone? Thanks! 🙇
Period over Period with Non-Time X Axis
First time poster!! Thanks for all the help you've contributed thus far Domo Community. I'm trying to create a year over year comparison graph with our locations on the X Axis, instead of the required time period on the x axis. The period over period comparisons are only available when Time is used on the x axis, so I…
Custom Date & Timestamp Formatting in Analyzer View of Cards
Hello Domo users! As a relative newcomer to this fantastic platform, I am thrilled to share my first discussion post with the greater Domo Community. I've been working with Domo for nearly a year at this point, and it has been a wonderful experience and I truly admire the insightful analytics and operational abilities this…
sec_to_time() Is adding an unnecessary period to durations
I'm using sec_to_time(`SessionTime`) to convert an integer of seconds into a duration however when a SessionTime should end in a single digit amount of seconds say, 5 seconds "12:45:05" the beastmode field is displayed as "12:45:5." This creates an unnecessary period and shows an inconsistent format. The result should show…
is there anyway to change default time in Domo?
Seems like date/time format always defaults to 12:00am. Is there anyway I can change this universally so that it always just defaults to 11:59pm when no time is specified in date/time format?
Option to schedule datasets in UTC or local time
When we schedule datasets today, Domo schedules them in UTC, so there are no adjustments for Daylight Savings changes. This means that we need to reschedule datasets that must refresh at a specific time of day locally (i.e., 6 AM Central Time, regardless of whether we are in Standard or Daylight Savings time) twice a year…
Previous Month Last Year
I'm trying to make some companion comparison cards so that I can display, for example, on one card the top 10 PDFs downloaded last month this year versus another card with the same month last year. I have the data by month already, and I need to have this for each month, moving forward. Is there an easy way to set some…
Calculating Time Diff (in hours) over Multiple Days
Hello 😊 I am trying to write a beast mode that will calculate the time difference in hours (sometimes over a multiple day period). For instance, if the start time is 4/1/24 at 1:00pm and the end time is 4/2/24 at 9:30am I would like the beast mode to calculate 20.5 hours. Any help is appreciated! Thanks!
WEEKOFYEAR is not aligning to ISO-8601, is this correct?
Hi, I recently utilised the Week of Year function for a date column. I'm unsure if this is incrementing from 0, but the value for the 12th of Feb 2024 returns 6. I would expect it to return 7. . Can someone confirm if this is intended? It looks to use Sunday as the start of the week in this function. Best, Sam
Configuring Card for Last Time Federated Dataset Refreshed Based on Browser Time Zone
Hello, I am trying to visualize in a card when the last time a federated dataset has been refreshed based on the timezone that a person's browser is set to. For example, if I see that this dataset last updated at 2 PM and I am in the Eastern Timezone, I would want that a person in LA time see that the dataset last updated…
Different time zone
Hi! I'm trying to configure the time zone in ETL but my query is resulting in different times when the function calculates the difference, for the same column. ETL time zone function: Imported table from SQL Server: Result after time zone changes: The date range of the table is from Feb 24 to Mar 12. From Feb 24 to Mar 8…
Using Dremio Iceberg tables and time travel feature in Domo?
Hello everybody, Is it possible to create a dashboard that utilice iceberg tables from Dremio to perform time travel? Looking for something similar to this: Thank you in advance!
Need an option in our domo instance to have user specific timezone.
We need an option in our domo instance to have user specific time-zone. If a user is in EST time zone, he/she could see have an option to view the date according to their time-zone rather than a universal time zone. Example: Run time of any dataset is 9PM IST but someone from EST time-zone could view the dataset run at…
TimeZone selection in connector set up
We are using the ServiceNow connector. Our Company time zone setting is on ET. When I compare data record time stamps within ServiceNow compared to Domo, Dome displays date information 5 hours behind the actual time shown in ServiceNow. While we can convert the date/time to correct within beast modes and dataflows, it…
Cards displaying today when set to yesterday - possible time zone setting issue
Our local time here is 6 hours behind UTC. We have a card that is set to display "yesterday" and it is a datetime column. I checked the card at 5:55 PM and it was displaying [yesterday's] data, then I checked it again at 6:01 PM and it was displaying [today's] data. So it seems like the "yesterday" in the card calendar…
Average RunTime & API Versioning
Average Runtime: It would be great to have an estimated runtime for each connection in DOMO. When using a new connector, it is hard to verify how long it would take for a sample data set to come back before expanding to the time frame required. Versioning: Most APIs have a version number. It would be great when selecting a…
Way to sort by hidden field
Is there a way to sort a table by a field that isn't in the table columns? I'm trying to sort time information chronologically like this: 1:00 AM 2:00 AM … 12:00 PM 1:00 PM But Domo sorts it like this: 1:00 AM 1:00 PM 2:00 AM 2:00 PM etc. I can have the time displayed as 24-hour but I'd rather not if possible.
How is Timezone inherited from source then converted?
I have a dataset coming in from the Gong connector and some timestamps come in as text fields (scheduled, started). Our Domo timezone is set to Eastern. When I cast data type as timestamp, the times move up 3 hours. Should I assume the Gong source data is Pacific (Gong is in SF) and Domo is inheriting the timezone…
Average of a difference in Timestamps
I have two timestamp fields: completed at and delivered at. I want to find the difference of both and take the average. The dates include a window that is sometimes over a day. I read this By @GrantSmith which is useful. Is there an easy way to do this without breaking up each segment (day, hour, minute, second) then…
Creating an Artificial downtime for maintenance for only week and work hours
I am trying to calculate downtime within DOMO. The downtime we have currenlty coming from the other system does not put in the factors of weekends and holidays as well as after hours. How can I calculate a correct amount of time between the starttime to endtime while only subtracting within the window. For example if A…
Is the KB article for Time Zone not yet updated?
This is regarding support case where customer is requesting to add Mountain Time Zone. The customer was unable to find required time zone as the drop down does not contain all time zone. One needs to manually enter the name of the time zone to get related time zone, which customers are not aware of. I am sharing the KB…
Period over Period Visual, YTD, 2 Day Delay with Current Date Data
Hi all, I'm leveraging the period over period charts and comparing the year to date progress with the progress from a year ago. Unfortunately, there's a two day delay in when the data comes in, and the historical period data isn't reacting to that. Is there a way to address that while still using the period over period…
Creating a Heat Map Based on Start and End Times
I have a data source that includes one row each for scheduled activities, with a column with the start date/time and end date/time (i.e. 2022-09-06T09:00:00 and 2022-09-06T13:00:00). What I need to produce is a heat map showing blocked out times in hour or half hour increments on a heat map, with the days of the week as…

Upcoming Events

Connections Tour
Spend a half day with your peers, Domo enterprise customer speakers, and product leads to explore real-world use cases and new platform innovations. Whether you’re a power user or just starting to learn about Domo, don’t miss this opportunity to learn from like-minded professionals about how they use data to multiply their…
Connections Tour
Spend a half day with your peers, Domo enterprise customer speakers, and product leads to explore real-world use cases and new platform innovations. Whether you’re a power user or just starting to learn about Domo, don’t miss this opportunity to learn from like-minded professionals about how they use data to multiply their…
Connections Tour
Spend a half day with your peers, Domo enterprise customer speakers, and product leads to explore real-world use cases and new platform innovations. Whether you’re a power user or just starting to learn about Domo, don’t miss this opportunity to learn from like-minded professionals about how they use data to multiply their…
Connections Tour
Spend a half day with your peers, Domo enterprise customer speakers, and product leads to explore real-world use cases and new platform innovations. Whether you’re a power user or just starting to learn about Domo, don’t miss this opportunity to learn from like-minded professionals about how they use data to multiply their…
Connections Tour
Spend a half day with your peers, Domo enterprise customer speakers, and product leads to explore real-world use cases and new platform innovations. Whether you’re a power user or just starting to learn about Domo, don’t miss this opportunity to learn from like-minded professionals about how they use data to multiply their…

Time

Discussion List