-
How to show the series list in order (largest to smallest on a symbol line graph?
Hi all, Just a quick question on using a symbol line graph, is there any way to have the key shown in the same order as the data is presented on the chart? I.e. in the example below I'd like the triangle to be at the top of my list, then the square etc. Thanks in advance!
-
All cards using federated data sets and using filters are broken
I woke up this morning and all of my embedded dashboards were broken. After some analysis it looks like any card on a federated dataset that is also using a filter is not rendering. These are embedded cards using programmatic filters below and none of them are currently rendering. They were all rendering properly…
-
Indian Currency & Abbreviation
In India, lot of clients working in Domo but we don't have the Indian currency(Rupees) in any of the cards. Also we don't have Indian abbreviation like L and Cr. Kindly add those features in Domo.
-
How do I flip the x axis on a vertical bar chart?
I have a vertical bar chart that has a goal of 25. The user is confused because the goal is "anything under 25 is good" but with how the chart looks it looks like you are trying to reach 25 because the goal is set at the top of the card. Is there a way to flip it so that the x axis is at the top of the card and thus makes…
-
Customize Color Theme / Reverse Order
I recently built a heatmap table where I want the lowest numbers up top. These start around -25 and end at -10 currently, but the numbers will change each time the chart is updated. I also only want to show 10 rows of data, so the table has been limited to the 10 top results. I want the heatmap to display negative numbers…
-
Add "Select All" Option To Drop-Down Filter Card
We had a use case where a user wanted to select all options in a drop-down filter except for one. However, the drop-down filter tile does not have the option to select all (which is a bit strange as other filter options (i.e. check box, radio) have this feature). It is tedious to have to go through all the options to…
-
Ability to hide tabs
Currently we can hide pages on an app from user view (great for making an archive!). My question is can we do this for tabs within pages? I have use cases where it would be useful to hide a tab when it is irrelevant then unhide when it is again. if not (and this is likely a different question altogether) can we have the…
-
Recovering Deleted Reports
Is there any plans for us to see and recover deleted reports in the future? Something similar to the trash bin on computers is my thought
-
bar value display issue
I'm thinking this might be a support ticket but thought I'd try here first. I've attached two images of a card that a user shared with me. The first image is what the card looks like before any recruiters are selected within the quick filter. The second image is what happens after any recruiter is selected. In the second…
-
Multi-Value Card - Revenue and YOY % Change
Hello Community, I need help creating a multi-value card in Domo to show total revenue and year-over-year percentage change based on filter selection. The requirements are: Yearly Comparison: If for example FY25 is selected, show FY25 revenue and compare it with FY24. Similarly, for other fiscal years. Monthly Comparison:…
-
How to show values on the pie chart instead of beneath?
Hi All, One of my cards on a dashboard is a pie chart, is anyone aware of how to show the totals on the pie chart instead of beneath? Is there also a way to show the numbers with consistent abbreviation? For example I'd like ot show it all in billions whereas at the minute it shows one number as billions, one as millions…
-
Y axis categories not interacting on dashboard
I am working on a dashboard, and I have been able to easily link my x axis categories like date quarter or region to where if I hover over one it highlights it on all the other cards in the dashboard. If I select one in a check box it filters out on all the cards. But the same is not true for the y axis. If I hover over…
-
Display Range on Multi-Value
Currently, the multi-value gauge can be used to compare two values & display the %change. It will be beneficial if we can add a way to show a range of values like min & max on the multi-values gauge The only way to do this currently is to use a text box & use the concat function on two different values.
-
Domo Packaged Apps Activity Visibility
I would like to see the Object ID's and their respective activity exposed in DomoStats data sets. As a specific use-case, we are looking to identify all associated Datasets, Cards & Pages embedded in Domo Campaigns, and their respective recent activity, to influence our archiving processes. At the moment, this is a…
-
Compare to Budget - Actuals in one Dataset and Budget Values in second Dataset
Hi community, BLUF: How can I compare budget to actual? We have data in one system that holds our actual sales amounts. We have data in a separate system that holds the budgeted sales amounts. I want to show the actuals and the budgeted in the same card. This seems easy enough in theory, but I've been struggling to…
-
Comparative Gauge is showing # change instead of % change. How can I show % change?
Hi, I am trying to show the YOY % difference here in my card but it's showing me a # difference instead. I'm wondering if this is because my LY number is 0. Does anyone know a fix to show the % number instead?
-
Any Way to Report on Column Usage in Cards
We are trying to filter out unnecessary and unused columns from our datasets and it would be really useful to be able to create a DomoStats or Governance report that shows which columns are used on cards and which are not used at all. Is there any way to do this?
-
Cards aren't loading
Cards are loading on the dashboard builder but not on the Embed Dashboard
-
Rotate Text in Textbox on Dashboard
Hi, It would be super helpful for dashboard formatting if we could rotate text in textboxes on dashboards. Thanks!
-
Lock all cards at once on dashboard
Hi, As I have around 40+ cards on my dashboard, its frustrating to go into each card and lock it individually to avoid users from editing. Is there any way this can be done at one place for the whole dashboard? I think this should stop the user from going to the Analyzer.
-
NULL value Handling
I'm a bit frustrated by this one. I have done everything along the path to ensure NULL values are being handled appropriately in my data. Starting from flat files and ending in a dataset (with several non-Domo steps in the middle). All of my data appears as expected in the dataset, but as soon as I add the column to a card…
-
How can I combine multiple data points from the same data column into one new data point.
Hello all, and thank you for any advice. I am trying to build out a card that combines multiple different values into one on a card. For example; say a column is tracking colors. I have values of red, blue, green, white, black, yellow. Could I create a card that shows black as one value, then combine all of the other…
-
Last X Periods to Date
I would like to add to the date filters on the to right corner of charts the following options: Life to Date Last [X] [Period] to Date I have a dataset where a number exists for 'Max Business Date' each day. As the days pass, the number gets bigger until it reaches the total number of business days at the end of the month.…
-
multiple Groups shown in just one column
Hello DOMO - Good Day! I am using the Data governance dataset that has the users and groups. what we wanted to show is the pages/dashboard and then all the groups that can view it. currently, I can show the different pages and the different groups in different columns. just wanted to know if we can show all the different…
-
Identifying what data came from which connector on a card.
Hello all, and thank you for any help. I have my magic ETL flow built out so a report is pulling information from two different connectors. There does not seem to be a batch ID or file path as options for me to select, which I thought would be the method to identify which system they pull from. Does anyone know how to…
-
How can we enhance visual customization in Domo dashboards for better data presentation?
I am reaching out to get some clarifications regarding certain features that I have been unable to locate within the Domo platform: Cards: 1. Separate Background Options for Cards 2. Opacity and Transparency Adjustment for Card Backgrounds 3. Shadows and Borders Options for Cards 4. Shape Adjustment of Cards Dashboard: 1.…
-
Multi-Line Chart with a "Stacked" Y-Axis?
Hi, is there a way to create a multi-line chart with a "stacked" y-axis? I've been able to do this in Tableau, yet I can't find an easy way to accomplish this in Domo. I've attached a screenshot of how it looks in Tableau. Here you can see that each line has its "own" y-axis. Having all of these on the same y-axis makes…
-
How can I set up to make the legend of a card always show up instead of getting greyed out?
Hi there, When hovering over either bar on the left chart, the legend on the right chart will sometimes get greyed out, but how to set up to make it not change the color at all?
-
Can you fix the headers in a pivot table
Hi All, I have a pivot table in my dashboard showing a last 12 month trend in the columns and a list on people in the y column - the issue I'm having is if I filter for a specific person then the columns with no data disappear i.e. if there is only quarterly data my picot will only show 4 columns. Ideally I want to fix the…
-
Extract/Export metadata information of entire DOMO App/Dashboard in Json/XML etc file format
I created an entire App/Dashboard end to end having lots of widgets including texts, images, layout, text, cards for visualising a particular dataset which I have created say using Database Connector/File upload What I want to extract/export the entire Dashboard metadata out of DOMO in some file format being it in Json/XML…