Using Beast Mode to substitute null fields
Best Answer

Let's make some modifications on the beast modes:
Resolved:
SUM(CASE WHEN `Status`='Resolved' THEN 1 ELSE 0 END)
Open:
SUM(CASE WHEN `Status`='Resolved' THEN 1 ELSE 0 END)
Don't mind the SUM() as it is just another way of counting the cases.Apply these ones with no aggregation. I did a graf by week and the results seem similar to yours:
Hope this helps, let me know if it works.
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0
Answers

Hi,
You can use on a beast mode :
IFNULL(YOUR_FIELD, 0)
Hope this helps.
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.1 
Hi Ricardo,
I actually tried this on two of my fields but it doesn't seem to change anything on the chart. I tried it on the field being counted in the Y axis and also tried it in the Series.
0 
I see...
I think that is because you are lacking dates in your xaxis.
Can you send a table view of your data?
Meanwhile, I'll think of something to address this if it's the case.
Regards
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0 

Ok,
I'm a little confused here. Does Case Number represent the number of cases that were open or solved in a given Date. What is the goal of the card?
If you could enlighten me a little more in order to give you the best answer.
Regards,
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0 
I'm sorry if I wasn't clear. What I'm doing on the card is counting the number of `Case Number` and using `Status` as the series. This shows me how many cases were opened each week and of those, which ones are still open and which ones are resolved. What I'm looking to do is to show that '0' are still open for the gaps in the chart.
0 
Ok,
So, if I correctly understood the card goal, give this a go:
Create 2 Beast Modes like this :
BeastMode OPEN:
CASE WHEN `Status`='Open' THEN `Case Number` ELSE 0 END
BeastMode Resolved:
CASE WHEN `Status`='Resolved' THEN `Case Number` ELSE 0 END
Then apply them to your card this way:
I think this will give you the expected results.
Hope this helps, don't hesitate to ask if you need more help on this.
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0 
So I just tried this and SUM is not an option when I do this. I can either COUNT or use No Aggregation. When I applied this with COUNT, it looks like it combines to two values (open, resolved) into the same line on the chart.
0 
Ok,
Can you share a sample of the dataset you are getting the data from?
I wrongly thought that the table you sent was it, but it is just the table view of the card.
Regards
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0 

Let's make some modifications on the beast modes:
Resolved:
SUM(CASE WHEN `Status`='Resolved' THEN 1 ELSE 0 END)
Open:
SUM(CASE WHEN `Status`='Resolved' THEN 1 ELSE 0 END)
Don't mind the SUM() as it is just another way of counting the cases.Apply these ones with no aggregation. I did a graf by week and the results seem similar to yours:
Hope this helps, let me know if it works.
Ricardo Granada
MajorDomo@Lusiaves
**If the post solves your problem, mark it by clicking on "Accept as Solution"
**You can say "Thank you" by clicking the thumbs up in the post that helped you.0 
That did it! Thanks so much!!!!!
1
Categories
 All Categories
 1.1K Product Ideas
 1.1K Ideas Exchange
 1.2K Connect
 969 Connectors
 257 Workbench
 Cloud Amplifier
 1 Federated
 2.4K Transform
 76 SQL DataFlows
 501 Datasets
 1.8K Magic ETL
 2.7K Visualize
 2.2K Charting
 375 Beast Mode
 20 Variables
 485 Automate
 103 Apps
 378 APIs & Domo Developer
 6 Workflows
 22 Predict
 6 Jupyter Workspaces
 16 R & Python Tiles
 316 Distribute
 64 Domo Everywhere
 252 Scheduled Reports
 59 Manage
 59 Governance & Security
 1 Product Release Questions
 5K Community Forums
 37 Getting Started
 23 Community Member Introductions
 63 Community Announcements
 4.8K Archive